Eco-style source environmentally sustainable building products for use within our projects. You can purchase any of our products simply by phoning us on (03) 6234 6077 or sending an email to mail@eco-style.com.au

ClearComfort window insulation - Intelligent window insulation

ClearComfort window insulation keeps heat where you and your family need it most: warmth inside your house in winter, and outside your house in summer. With our intelligent windows insulation you will create a year-round comfort zone for your family, while enjoying clear views and unimpeded daylight.

The ClearComfort system provides the energy savings of double-glazing at a fraction the cost!

ClearComfort insulation is a tough, transparent membrane that attaches to your window frame to enclose an insulating layer of air.

Windows are critical to the overall energy efficiency of a house. When you apply the ClearComfort transparent membrane to your windows you will instantly increase the Energy Rating (Star value) of your home The ClearComfort insulation system achieves a Five Star energy rating for windows as measured by the NatHERS methodology.

The ClearComfort system has been tested by a NATA accredited auditor using the Australian Window Energy Rating Scheme (WERS) developed by the CSIRO and the Australian Window Association. The audited measurement of energy saving after fitting ClearComfort to a typical bare, clear, single-glazed window of 1500 mm x 1800 mm are:
11% better for cooling
17% better for heating
12% less interior fading

The ClearComfort solution uses state-of-the-art technology from the plastics and adhesives industries.

Do it yourself

Contents of the ClearComfort Kit:
totally transparent heat-shrink membrane, equally transparent strong double-sided tape, instruction sheet.

You will need:
scissors, cutting blade, a small hand-held hair dryer.

Simple three-step process

1. Tape frame with transparent double-sided tape

2. Press on membrane, cut off excess

3. Shrink membrane with hairdryer until taut and smooth

Most timber window frames (including doors and skylights) have a flat surface for attaching the tape and polymer sheet without further treatment.

If you have a different type of window frame you may need to vary the method. These variations are described in the instruction sheet. We have a solution for just about every type of window.

If you have any questions or would like to purchase a ClearComfort Kit, Contact us today